China S Series Helical China Gearbox Electric Motor Reducer Worm Gear Box worm gearbox application

Merchandise Description

 

Merchandise Description

 

Product Description

-S Collection Helical gearbox
 

 

Item Features
one.Substantial modular design.
2.Integrated casting housing,compact dimension,high loading support, secure transmitting and lower sounds degree.
3.With the specific equipment geometry, it receives large torque, effectiveness and prolonged lifestyle circle.
4.It can attain the immediate combination for 2 sets of gearbox.
five.Large efficiency and help save electricity.

6.Help save value and minimal routine maintenance.

 

Merchandise Parameters

one. Technical data

Dimensions 38 48 58 68 seventy eight 88 98
Framework BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) .eighteen~.75 .18~1.5 .18~3 .twenty five~5.five .fifty five~7.five .75~fifteen 1.5~22
Ratio 10.27~one hundred sixty five.71 eleven.forty six~244.74 10.78~196.21 eleven.fifty five~227.twenty nine.ninety six~241.09 11.83~223.26 twelve.75~230.forty eight
Permissible Torque(N.m) 90 one hundred seventy three hundred 520 1270 2280 4000
Bodyweight(kg) 7 10 14 26 50 a hundred a hundred and seventy

two: Design and style option
 

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

 

Materials Info Sheet

Housing materials

Gray Cast iron

Housing hardness

HBS163~255

Equipment material

20CrMnTi alloy steel

Area hardness of gears

HRC58°~sixty two °

Equipment main hardness

HRC33~48

Enter / Output shaft substance

40Cr alloy metal

Enter / Output shaft hardness

HRC32~36

Machining precision of gears

correct grinding, 6~5 Quality

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Warmth remedy

tempering, cementiting, quenching, normalizing, and so on.

Performance

ninety four%~96% (is dependent on the transmission phase)

Noise (MAX)

sixty~68dB

Temp. rise (MAX)

40°C

Temp. rise (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Brand of bearings

China top model bearing, HRB/LYC/ZWZ/C&U. Or other brand names asked for, SKF, FAG, INA, NSK.

Brand of oil seal

NAK — ZheJiang or other brand names requested

 

In depth Images

 

 

Our procedure of production

 

 

Our item line

 

 

Business Profile

 

Firm Profile

Bode  was founded in 2007, which is situated in HangZhou city, ZHangZhoug province. As 1 expert manufacturer and exporter, we have much more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare areas. We have manufacturing unit with innovative generation and check equipment, the robust improvement of staff and creating capability offer our buyers with substantial high quality items. Our items commonly served to numerous industries of Metallurgy, Chemical substances, lifting, mining, Petroleum, textile, medication, picket and so on. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to question us any concerns, great supply constantly for you for extended time period organization.

FAQ

Q1: Are you investing business or producer?
A: We are manufacturing facility.

Q2: What varieties of gearbox can you generate for us?
A: Major goods of our organization: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Collection Parallel Shaft Helical Reduction Equipment Box

Q3: Can you make as for each custom drawing?
A: Sure, we offer customized support for buyers.

This fall: Can we purchase 1 laptop of every single product for high quality screening?
A: Yes, we are glad to settle for trial order for good quality screening.

Q5: What data shall we give ahead of positioning a purchase buy?
A:  a) Sort of the gearbox, ratio, enter and output variety, enter flange, mounting place, and motor informationetc.
     b) Housing shade.
     c) Acquire quantity.
     d) Other particular specifications.

Q6: How long is your shipping and delivery time?
A: Typically it is 5-ten times if the items are in inventory. or it is fifteen-20 days if the merchandise are not in inventory.

Q7: What is your conditions of payment ?
A: thirty% Advance payment by T/T after signing the contract.70% ahead of shipping

If you are interested in our solution, welcome to get in touch with with us.
Our team will do our greatest to fulfill your need 🙂 
 

 

US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested
US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

Worm gear reducer

A worm gear reducer is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
worm_reducer

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer. A worm gear reducer with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducers have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducers is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducers, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducers are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
worm_reducer

application

The worm gear reducer market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducers can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducers are the most popular type of reducer. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer is a popular type of reducer. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer in multiple installation locations.
Another application for worm gear reducers is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer is determined by several factors. Size and material are important. Worm gear reducers can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm_reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducers with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China S Series Helical China Gearbox Electric Motor Reducer Worm Gear Box     worm gearbox applicationChina S Series Helical China Gearbox Electric Motor Reducer Worm Gear Box     worm gearbox application
editor by czh 2022-12-07

Tagsapplication | box gear | box motor | box reducer | china gear box | china gearbox | china motor | electric gear | electric gear motor | electric gearbox | electric motor | electric motor electric motor | electric motor gear | electric motor gear reducer | electric motor gearbox | electric motor reducer | electric reducer | gear | gear box | gear box gearbox | gear box motor | gear box reducer | gear box worm | gear gearbox | gear motor | gear motor gearbox | gear motor reducer | gear reducer | gear reducer box | gear reducer gearbox | gear reducer motor | gear s | gear worm | gear worm motor | gearbox | gearbox china | gearbox electric motor | gearbox gear | gearbox gear box | gearbox motor | gearbox reducer | helical gear | helical gear box | helical gear motor | helical gear reducer | helical gearbox | helical motor | helical motor gearbox | helical reducer | helical worm | helical worm gear | helical worm gear motor | helical worm gear reducer | helical worm gearbox | motor | motor box | motor electric | motor gear box | motor gearbox | motor gearbox china | motor motor | motor reducer | motor reducer gearbox | motor worm | motor worm gearbox | reducer | reducer gear box motor | reducer gear motor | reducer gearbox | reducer motor | reducer worm gear | s series gear reducer | s series reducer | series gear reducer | worm gear | worm gear electric motor | worm gear gearbox | worm gear motor | worm gear reducer | worm gear worm | worm gearbox | worm motor | worm motor gear | worm reducer | worm reducer gearbox | worm worm gear

Gearbox-worm

As one of leading gearbox-worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox-worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox-worm.

Recent Posts