O-Ring Chain (LD)/X-Ring Chain (LX)

Highest dress in resistance out there by sealing grease concerning pins and bushings
The sturdiness of chain is considerably enhanced due to the fact grease is sealed in between the pins and bushings by O-rings. The O-ring chain could be the most reliable model with the Greatest Daily life Chain Series with its great wear resistance even from the situations or environments where chain maintenance is tricky.
Suggested uses.
?Conditions where frequent chain substitute is needed resulting from put on stretch
?Conditions in which lubrication throughout the support is unattainable
?In an natural environment with considerably soil, sand, dust, and so forth.
?Applications that require power increased than that of the sintered bushing roller chain
Other attributes
?Reducing noise. (The noise degree is three dB reduce in contrast to normal roller chains.)
?Minimizing vibration together with the friction created by O-Ring. (The energy reduction as a result of friction is nearly negligible, because the frictional force among the pins and bushings is for normally in the applications.)
Choice of chains
The power of an O-ring chain is nearly the identical as that of a regular roller chain. (Since the pins are longer than those of regular roller chain, the average rupture power is slightly reduced.)
For picking out an appropriate chain, refer to “Selection of Chains” .
When the service ambient temperature is greater than 80° C, special heat resistant O-rings have to be made use of. In this instance, make contact with us for more information.
Connecting backlinks and offset links
Two types of connecting hyperlinks can be found: clearance fit and interference fit. When high power or durability is needed, use interference-fit connecting website link. Only 2POJ is available since the offset link for all sizes.
Sprockets
O-ring chain employs longer pins than a standard roller chain. When employing multiplex O-ring chain, the standard sprocket for multiplex chains cannot be used.
Caution
O-ring chain just isn’t advised in applications wherever solvents or other substances might assault “Nitric Rubber”. Specific materials O-rings may also be available for these situations: Please check with us for specifics. On the whole, “Nitric Rubber” is damaged by contact with all the following chemical elements.