helical worm gear motor

helical worm gear motor
Helical-worm gearmotors
Due to their design and from being coupled with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. Also, they are extremely low-noise and thus avoid high sound emission levels.
Low-noise continuous operation: equipment unit combination optimized with respect to efficiency
Do you anticipate a drive remedy to impress you using its high level of efficiency and efficiency? In that case, we would recommend our high-quality helical-worm gearmotors EP to you. These could be implemented individually in the modular system. In this way, they offer you a massive range of sizes, equipment ratios and engine sizes.
However, their greatest power is usually their running smoothness and their extremely low noise development. A very important factor is certain – With the helical-worm gearmotors EP you are choosing a robust drive solution which you will hardly actually hear.
The overall concept offers you a lot more practical product characteristics and benefits. These include the significantly higher effectiveness of the helical-worm combinations as opposed to single helical-worm gear units. This is one way you save additional energy in the operation of your systems and so are able to noticeably reduce ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to suit your individual requirements – with an array of AC motors. In addition, you can freely configure all the relevant properties. In this way, you can effectively utilize all the benefits provided by this combination of low-noise helical-worm equipment unit and performance-optimized motor. Even greater variance may be accomplished because of the optional flange or foot-mounted design and by choosing between solid and hollow shaft.
Save money and time
By opting for one of our gearmotors, you already are saving time and money with this selection and task planning. It is because our modular system allows a multitude of combination options for gear products and motors. You can therefore reduce operating costs, count on a long service life and benefit from simplified maintenance that’s feature of our brand.
Helical-worm gear units
Helical-worm combinations with considerably better efficiency than one helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm wheel provide exceptional sturdiness and lengthy service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft attach or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear models are helical/helical-worm combinations, so they are more efficient than normal helical-worm equipment units. Because of their outstanding efficiency, these drives can be utilized in every commercial sector and tailored to person torque and swiftness requirements. The decrease ratios afforded by the helical-worm gear stage and the low noise levels during procedure make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique mixture of optimized worm wheel material with particular lubricants, optimized shape, this powerful electric motor achieves high levels of performance and torque. The casing machined on all sides allows diverse mounting options. Double chamber shaft seals are utilized as standard.
The low contour design helps it be suitable for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and surface worm gears: Provides higher efficiencies and better torque capacity in smaller sizes.
Multiple Input Options: Integral gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric result shafts, mounting pilots and flanges offer a wide selection of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Continues contaminants and water away.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors set new criteria for reliability, effectiveness and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration at this point and a truly future proof answer. The EP gear electric motor offers total versatility in mounting choices includes shaft, base, encounter, and flange solutions. The motor terminal box can be mounted in substitute positions rotated in 90º steps around the motor frame offering for unparalleled integration possibilities.
EP gear motors adhere to UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a genuine total alternative for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is definitely dust tight and hose proof,and can be utilized outdoors or in wet and dusty conditions without the usage of additional enclosures. Full rated output is available at the result shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Due to the unique combination of optimized worm wheel material with special lubricants and optimized shape, this powerful geared electric motor achieves high levels of effectiveness and torque. The low contour design helps it be suitable for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with long life performance features and simplified maintenance. The use of condition of the art helical and worm gear combinations affords optimum overall performance fulfilling a multitude of ratio requirements. The 800 BR is usually functionally interchangeable with most major manufacturer’s drives.
SPECIFICATIONS
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All products shipped pre-lubed for your particular installation position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and direct input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All models adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient compact right-angle geared engine. A favorably priced alternate for the standard duties expected of a right-position drive.
5 equipment sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors available with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC electric motor are directly flange mounted, the pinion is upon the motor shaft. This integrated compact design is an essential element for the high precision and the remarkable stiffness of EP geared motors.
For vector-controlled inverter procedure use of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are made from case hardened alloy metal and the flanks are precision floor. The worm wheels are made from special wear-resistant bronze. Helical worm gears are equipped with a helical equipment. Worm gears with shrink disc, torque limiter, as well as adjustable backlash designs are also part of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall efficiency gearboxes in universal design. The housings are produced from high quality cast iron. The rugget walls and internal ribbing ensure extremely torsional stiff and noise dampening housings. The exterior ripping provides a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with tough walls and internal ribbing
Intense torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available as solid shaft or hollow shaft
Shrink disc, torque limiter,as well as adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

Tags

Gearbox-worm

As one of leading gearbox-worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox-worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox-worm.

Recent Posts