worm reduction gearbox

Our worm equipment reducers offer an option of a good or hollow result shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, however, can endure shock loading much better than other reduction gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Quickness Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s swiftness reducer products – has been serving industry reliably for over 40 years. Its confirmed modular design has set the market standard for performance and is the most imitated product in the current worm gear swiftness reducer marketplace. But why accept a knock-off when you can have the original – from EP Gear.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting flexibility permits installation in practically any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings can be found in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high input speeds, or when gearmotor performance is important. Contact our technical sales staff for help determining which gearbox answer is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers are designed with a hollow bore and allow for a corner change with optional dual result. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes were created with five mounting options providing flexibility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a good and efficient correct angle configuration, our correct angle planetary gearboxes provide a robust solution. The proper angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest procedure of our quickness reducers. These gearboxes are created to handle varying loads with small backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size is also available with plastic-type material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest efficiency and best result torque of most our swiftness reducers. These gearboxes are created to handle varying loads with little backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options which range from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top choice for constant duty applications. Their equipment cluster design provides a highly effective method for dissipating heat. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options so they work very well in environments with limited space. Our parallel shaft equipment reducers offer an affordable drop-in replacement solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, speed reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement in which a gear in the kind of a screw, also referred to as a worm, meshes with a worm equipment. These gears are typically made from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur gear, the worm gearboxes are considerably smaller than other equipment reduction boxes. A principal benefit of worm equipment reducers is that they generate an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox has right hand threads; to improve the direction of the output, a left-hand thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio

If this write-up really did not fulfill your inquisitiveness worrying Worm Reduction Gearbox, check these added ones out.

Tags

Gearbox-worm

As one of leading gearbox-worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox-worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox-worm.

Recent Posts