Standard Description
Equipped together with the zero leak bidirectional checking sole-noid valves, this energy unit is built for your operation of two independent circuits. Which are respectively for that primary and subordinate platforms in the double scissors lift. Two cut-off valves are employed for decreasing the machine manually in case of electrical power reduction. If additional independent circuits are demanded to your application please get hold of us for availability.
Remark: 1. Please check with our income engineer for that distinctive pump displacement, motor energy or tank capacity.
two. CSA or UL licensed motors can be found on request.
Special Notes
1. The AC motor is of S3 duty cycle, which could only operate intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean each of the hydraulic elements concerned just before installation of the 
energy unit.
three. Viscosity of your oil shoud be 15~46 cst,as well as the oil must be clean and absolutely free of impurities,N46 hydraulic oil is advised.
four. The energy unit should really be mounted vertically.
5. Check the oil level during the tank soon after the preliminary working on the energy unit.
six. Oil transforming is needed soon after the preliminary 100 operation hrs,afterwards once each 3000 hrs.
Electrical power UNITS FOR DOUBLE-SCISSORS LIFT
Tags