Double pitch chain

Normally, conveyor chains are operated for longer distances and at reduce speeds than transmission chains. Accordingly, although the pins, bushings and rollers are left unchanged, along with the plate pitch is doubled to reduce the number of sprocket teeth engaged with all the chain to half, the dress in of pins, bushings and rollers is tiny since the chain speed is very low. Double Pitch Chains, conform to ANSI normal and “Ultimate Daily life Chain Series” and “Environment Resistant Chain Series”, as are single pitch chains are also obtainable.
Double pitch chain with resin rollers
This is a Double Pitch Chain with R Roller made from resin, which generates less noise and lighter weight in contrast with steel rollers. Hence, the chain is appropriate for a conveyor technique made to operate quietly and convey light-weight articles. Since the parts other than rollers are manufactured from steel, the average tensile strength of the resin roller chain is definitely the similar as that of a steel roller chain. Nevertheless, the “maximum allowable load” from the chain really should be kept reduce, as proven within the following table, to prevent injury for the plastic rollers through the strain from your engagement with sprockets.
The “Allowable load of resin rollers” refers on the allowable load acting when conveyed posts press the resin rollers traveling around the floor surface such as guid rails.
Large roller (R) and little rollers (S)
Because double pitch chains are regularly utilised for conveying merchandise on the horizontal floor, chains designed for this objective have increased roller diameter equal to that of single pitch chains of your identical pitch for improved load capability and reduced traveling resistance. These rollers with greater outer diameter are termed “large rollers”, and the typical rollers are identified as “small rollers”.
Within this catalog, big rollers are expressed as R Roller, and smaller rollers as S Roller.
Designation of double pitch chains
A double pitch chain is designated, as within the following example, based upon the nominal quantity of the single pitch chain it can be depending on.
Connecting hyperlinks
For that connecting hyperlinks of double pitch chains of all sizes, the connecting plates and connecting pins are clearance-fitted. For C2060H or smaller sized, the spring clip variety (R connecting website link) is conventional. For C2080H or bigger, the cotter form (C connecting link) is standard. Connecting back links with an attachment, leading roller or side roller can also be readily available.



As one of leading gearbox-worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox-worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox-worm.

Recent Posts